Mixing Filter Dryer for Solid Liquid Separation

• Customization: Available
• After-sales Service: 1year
• Warranty: 1year
• Model NO.: DN400
• Heating Mode: Transmission
• Material Status: Powder, Solution
• Atomization: Gas Atomization
• Flow: Parallel Flow
• Heat Source: Electricity, Steam
• Type: Spray Drying Equipment
• Quick Details Place of Origin: 1 Year
• Machinery Test Report: Not Available
• Key Selling Points: Easy to Operate
• Weight (Kg): 600kg
• After Warranty Service: Online Support
• Local Service Location: United States
• Core Components: Motor, Gearbox, PLC, Pressure Vessel
• Material: Stainless Steel 304/316L
• Filtering Area: 0.125m2
• Inside Diamete: 400mm
• Nominal Volumeion: 0.07m3
• Filter Cake Height: 120mm
• Blade Lifting Height: 150mm
• Motor Power: 0.55kw
• Total Height: 2550mm
• Transport Package: Export Packaging
• Specification: Total Height 3400mm
• Trademark: JhenTen
• Origin: China
• Production Capacity: 10 Set/Sets Per Month
• Package Size: 120.00cm * 200.00cm * 120.00cm
• Package Gross Weight: 200.000kg

Product Description

  

Packaging & Delivery

Packaging Details
PLYWOOD CASE
Port
NINGBO
Lead Time :

Quantity(Sets)	1 - 1	>1
Est. Time(days)	30	To be negotiated

 

Agitated Nutsche Filter Dryer for solid-liquid separation

 

Product Description

Filter-dryer working principle
The Nutsche filter dryer comnines two process operations, filtration and drying, in a single piece of equipment. Filtration liquid-solid separation and agitated vacuum drying allow batch  manufacturing of chemical and pharmaceutical products.Filter dryer can also be used for other process such as vegetal extraction.

Features

• The design and assembly of the equipment are carried out strictly following national GMP requirements, and fully conforming to pharmaceutical production process requirements. The system is safe, stable and reliable.

• The equipment materials are strictly controlled. The parts that directly contact materials are made of non-toxic and corrosion-resistant sealing material such as austenitic stainless steel(316L 304), Hastelloy, PTFE FFKM or EPDM etc. The filter screen adopts metal sintering screen made of SUS316L, C22 etc.

• The interior surfaces of the equipment that directly contact materials are flat and smooth without dead comer for the convenience of cleaning and sterilizing.

• The equipment dose not pollute the external environment. and the measures of dust prevention, leakage prevention, heat insulation and noise prevention are properly adopted. Under the fully closed working status, the motor, speed reducer and lifting device are protected by stainless steel outer covers, The retum duct in jacket adopts heat preservation cotton to insulate, can greatly reduce heat oss, heat exchange with the outside environment and the influence on the surroundings.

• Safe and reliable explosion-proof electrical appliances are adopted. The pulleys that can eliminate static electricity and other safe interlocks and safety devices are allocated.

• All the pipes of materials, solvents and nitrogen gas are designed to have no dead comer and blind pipe. The equipment surfaces are subjected to mechanical automatic fine polishing or electrolytic polishing with the interior surface Ras0 4 and the exterior surface Ra≤0.8.

• The blending shaft and lateral discharging valve stem are installed with metal bellows.

• 360 spraying cleaning spray balls for CIP are equipped in the tank. 

 

 

Features

• The design and assembly of the equipment are carried out strictly following national GMP requirements, and fully conforming to pharmaceutical production process requirements. The system is safe, stable and reliable.

• The equipment materials are strictly controlled. The parts that directly contact materials are made of non-toxic and corrosion-resistant sealing material such as austenitic stainless steel(316L 304), Hastelloy, PTFE FFKM or EPDM etc. The filter screen adopts metal sintering screen made of SUS316L, C22 etc.

• The interior surfaces of the equipment that directly contact materials are flat and smooth without dead comer for the convenience of cleaning and sterilizing.

• The equipment dose not pollute the external environment. and the measures of dust prevention, leakage prevention, heat insulation and noise prevention are properly adopted. Under the fully closed working status, the motor, speed reducer and lifting device are protected by stainless steel outer covers, The retum duct in jacket adopts heat preservation cotton to insulate, can greatly reduce heat oss, heat exchange with the outside environment and the influence on the surroundings.

• Safe and reliable explosion-proof electrical appliances are adopted. The pulleys that can eliminate static electricity and other safe interlocks and safety devices are allocated.

• All the pipes of materials, solvents and nitrogen gas are designed to have no dead comer and blind pipe. The equipment surfaces are subjected to mechanical automatic fine polishing or electrolytic polishing with the interior surface Ras0 4 and the exterior surface Ra≤0.8.

• The blending shaft and lateral discharging valve stem are installed with metal bellows.

• 360 spraying cleaning spray balls for CIP are equipped in the tank. The balls can adopt 360-degree rotary spray ball.

• Dry-process double-face mechanical seal, nitrogen protection and cooling.

• Dust capture device with CIP function
• 

  Batch filtration-drying processes can be in the follow steps

  1.Filling 

  The vessel is filled with a slurry(liquid/solid mixture), generally fed from a reactor or crystallizing tank.

  
  2.Filtration
  A liquid/solid separation process takes place through the filtration media ,Filtration(solvent) are collected beneath the filter plate.

  
  3.Piston displacement washing
  Washing liquid are used to wash the product cake ,Avolume of liquid is displaced through the cake.washing it.

  
  4.Reslurry washing
  The agitator is used the re-slurry the solid in a washing solvent.

  
  5.Smoothing
  The agitator is used to smooth the wet cake in the filter dryer, to avoid the formation of cracks or preferential paths.

  
  6.Drying and cooling
  Agitated vacuum drying consists in applying a vacuum on the vessel, while heating the walls and agitator using thermal circuits.This allows to reach the liquid boiling point and to dry the product.

  
  7.Discharging
  The specially designed agitator pushes the product out towards a side discharge port.

   

  Main parameters

  Model	Filtering Area(m²)	lnside Diameter(mm)	Nomingl  Volume(m³)	Filter Cake Heighl(mm)	Blade Lifting Heighl(mm)	Motor Power(kw)	Net Wwight(kg)	Total Height(mm)
  DN325	0.08	325	0.04	100	120	0.37	600	2050
  DN400	0.125	400	0.07	120	150	0.55	860	2550
  DN500	0.19	500	0.15	140	160	2.2	1500	3000
  DN600	0.28	650	0.22	180	200	2.2	1700	3300
  DN650	0.3	800	0.28	180	200	2.2	1850	3400
  DN800	0.5	1000	0.46	200	220	3	2250	3500
  DN1000	0.8	1200	0.95	220	250	5.5	3500	3800
  DN1200	1	1400	1.2	250	300	7.5	4900	4000
  DN1400	1.5	1600	1.9	300	350	11	6500	4500
  DN1600	2	1800	2.59	300	350	15	7500	4500
  DN1800	2.5	2000	3.2	350	400	15	10000	4700
  DN2000	3	2300	4.5	400	450	18.5	11700	5100
  DN2300	4	2600	6.4	400	450	22	12800	5200
  DN2600	5.3	2800	9	400	450	22	17000	5600
  DN2600	6	3000	10.5	450	500	30	21000	5800
  DN3000	7		12	500	550	37	24000	6000

 

Company Profile

 

Wenzhou Jhenten Machinery Co exceeds in this filed and has been credited wth honors of ISO9001-2008 quality management system certificate, CE certificate and ASME certificate.

In additon to the introduction of new manufacturing methods an the purchase of advancedwelding equipment, we are also dedicated to researching the improvement of quality, functionand usage life of our products. We have been meenting global demand of high quality & technical support to our clients. Our products cover from all kinds sanitary filter, cartidge filter, bag filter, mixing tank, strorage tank etc, which have been applied into fields of pharmacy, food & beverage, biological engineering, lab soluton laboratories, mineral water, liquor and cosmetics.

No matter the functions, data presentation material use, welding techniques, Qc, or the lookof our products have gone through careful design and are strictly comply with ISO9001 and CE standard system. Besides we have obtained the sanitary license and honour of high quality & honesty from authority.

 

FAQ

Q: CAN I HAVE SAMPLES TO TEST?

A: Yes, we are pleased to supply samples to test and check quality, miled sample order is available.       Please note, free samples is not acceptable.

 

Q: DO YOU HAVE ANY MOQ LIMITED?

A: Our MOQ is 1PC to supply new customers.

 

Q: WHAT'S THE LEAD TIME?

A: Sample: 20-25days. Mass production: 25-30days depend on the order quantity.

 

Q: HOW DO YOU SHIP THE GOODS AND HOW LONG DOES IT TAKE?

A: We ususlly ship by sea. DHL, UPS, fedex TNT are also acceptable.