Stainless Steel Emulsion Tank for Milk

• Model NO.: ZT
• Origin: China(Mainland)
• HS Code: 84219990
• Production Capacity: 500 Sets/Month

Product Description

High-speed Emulsion Tank
High-speed emulsion adopts high-speed impeller at the bottom of the mixing device, the production of sugar, milk powder, plastic additives category has a good emulsification effect dissolved. It is the most efficient products in the similar products.

The principle: Centrifugal high-speed emulsion in the first hours of work can have an enormous rotating suction, will be at the top of the rotor is rotating with smoking materials, high-speed and then rammed into the stator, through high-speed transfer between the stator shear, collision, smash, the materials together be poured out. At the same time, anti-tank at the end of rotary vortex baffle will force up and down into a somersault, so that the tank evenly mixed materials to prevent the accumulation of liquid in the powder agglomerate, and to achieve hydration emulsion.

Uses: Emulsion can use a very wide range of types of cooking oil, the type of flour, sugar, and other raw materials of the mixed emulsion. In particular, apply to certain types of additives such as insoluble gel CMC, xanthan gum, etc.

VOLUME	300L	400L	500L	600L	800L	1000L	1500L	2000L	3000
Cylinder diameter  (mm)	Φ 800	Φ800	Φ900	Φ1000	Φ1000	Φ1000	Φ1200	Φ1300	Φ1600
cylinder height (mm)	600	800	800	800	1000	1220	1220	1500	1500
motor power (kw)	3	3	4	4	5.5	7.5	7.5	11	15
speed of agitator (RPM)	1750 r/min
structure	square    open on the top                              below is a cone

Design Parameter
Design Pressure	Barrel according to customers' requirement(0.02MPa~0.8MPa) Jacket according to customers' requirement(0.02MPa~0.5MPa)
Design temperature	Body,Jacket according to customers' requirement(0ºC~160ºC)
Material
Liner	304,316L
Jacket	304
Insulation	Rock wool (keep warm) PU (cold insulation)
Feet	304
Connection
In-outlet	Quick open, Flange
Surface Finish
Finish Type	Mechanical polishing, electrolytic polishing, sand blasting, pickling
Polishing precision	Inner wall 0.4μm,outer wall 0.6μm

Normal Model And Main Technical Parameters
Parameters		Model	JTRJJ-600	JTRJJ-1000	JTRJJ-2000	JTRJJ-3000	JTRJJ-4000	JTRJJ-5000
Effective volume:L			600	1000	2000	3000	4000	5000
Body	Diameter:mm		Φ900	Φ1100	Φ1300	Φ1600	Φ1700	Φ1800
	Height:mm		900	1000	1500	1500	1800	1800
Agitator	Power:kW		1.1	2.2	2.2	3	3	4
	RPM:r/min		60(Curved blade paddle)(The design can be adjusted according to customer use condition)
			JTRJJ-6000	JTRJJ-8000	JTRJJ-10000	JTRJJ-12000	JTRJJ-15000	JTRJJ-20000
			6000	8000	10000	12000	15000	20000
			Φ1900	Φ2000	Φ2200	Φ2400	Φ2600	Φ2800
			2000	2200	2400	2500	2700	3000
			4	5.5	7.5	7.5	11	11
			60(Curved blade paddle)(The design can be adjusted according to customer use condition)
			The above-mentioned data is the standard, for reference only.It can customize according to customer's requirements.