High Flow Filter Cartridge
High Flow Filter Cartridge is a new product developed by WENZHOU JHENTEN MACHINERY Co., Ltd. It has a 6 inch/152mm large diameter, and is coreless, single open-ended with an inside to outside flow pattern. The large diameter with big filter area insures to reduce the number of filter cartridges and the dimention of housing required...The long service life and high flowrate result in low investment and less manpower in many applications
Gradient pore structure
Up to 110M3/H flowrate per filter cartridge for water filtration.
Maximum 50% reduction of filter system
20.69 inch /525mm, 40.69inch/1033mm and 60.69 inch/1541mm lengths are available
All contaminants can be removed within the cartridge because of the flow direction.
Technical Specifications
Materials of Components
| *Filter media |
Pleated glass fiber: Pleated depth Polypropylene(PP), or Melt blown PP |
| *Support/Drainage |
Polypropylene(PP) |
| *End caps |
Glass fiber reinforced Polypropylene |
| *O-ring seal |
EPDM, NBR |
Removal Ratings
1um, 4.5um, 6um, 10um, 20um, 40um, 70um, 100um
Outside Diameter: 6 inch(152mm)
Length: 20.69 inch(525mm)/ 40.69 inch(1033mm)/60.69 inch(1541mm)
Operating Conditions
*Maximum Operating Temperature:
*Pleated glass fiber: 121 Degree;
*Pleated PP: 82 Degree
*Melt Blown PP: 65 Degree
*Maximum Differential Pressure: Pleated glass fiber: 3.4bar at 121 Degree
*Pleated PP: 3.4Bar at 82 Degree;
*Melt Blown: 1.03Bar at 65 Degree
*Recommended Change out Differential Pressure: 2.4Bar at 20 Degree.
*Suggested maximum Flow of water: 20.69 inch length: 660LPM; 40.69 inch length: 1, 300LPM; 60.69 inch length: 1, 900LPM.
Applications
Prefiltration of RO, Pretreatment of sea water desalination
Condensate water filtration, hot water recovery in power generation
API, solvents, and water filtration in BioPharm market
The filtration of bottled water, high Fructose, edible oil, soft drinks, and milk
Paints and coatings, Petrochemical, Refineries
Microelectronics, film, fiber and resin
Part Numbers/Ordering Information
Darlly Hi-Flowment Filter cartridge P/N:
DLHF6* # = + (e. G., DLHF660PP20E)
Code * Cartridge Length(inch/mm) Code # Media Type
20 20.69/525 PP PP Pleated
40 40.69/1033 PM PP Melt Blown
60 60.69/1541 GF Pleated glass fiber
Code = Removal Rating Code + O-ring material
1 1um E EPDM
4.5 4.5um B Buna N
6 6um
10 10um
20 20um
40 40um
70 70um
100 100um
Audited Supplier 
){kind=link}