| Customization: | Available |
|---|---|
| Usage: | Manufacturing Plant, Food & Beverage Factory |
| Certification: | CE, ASME, ISO9001 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
• JTGSF Industrial Grade Precision Liquid Filter is precision filter which is specially designed for industrial field, It can be applied for various chemical materials and meet the requirements of different flow.
• The filter housing using side entry & bottom out flow method, it ensure that the material liquid does not overflow when replace cartridge in process. The filter housing can be design to three-stage structure, shell can be opened from top and bottom, the filter can be absolutely disassemble. For the application of some very harsh cleaning, the filter can full angle cleaning.
• JTGSF Industrial Grade Precision Liquid Filter use many times polishing process, ensure that the material liquid contact surface Ra reached 0.6 um close to the sanitary requirement, the filter polished is mirror polished. It can be applied in high precision liquid filtration.
Feature
• Filter can be made into the form of top and bottom openings, which is convenient to replace the filter and to clean thoroughly.
• The filter faceplate can be made into a detachable type, to achieve thorough cleaning.
• Two drain vents, respectively in the top of the disk and the bottom of the filter, let discharging easy and complete.
• Side in and bottom out, this design ensures that the liquid can be completely discharged At the same time, tangent outlet makes sewage discharged thoroughly, and workers operate easily.
• For more than 15 cartridges filter housing, the swing arm and eyebolt or quick open are optional design to operate easily. Also is a economical and practical design.
Application
• Water Finish: all kinds of water filtration.
• Food beverage: wine, mineral water, drinking water filtration.
• vChemical industry: all kinds of organic solvents, acid, alkali, filtration
| Operating Conditions | |
| Max. operating pressure | 0.6MPa 1.0MPa |
| Max. operating temperture | 150ºC |
| Material | |
| Shell | 304, 316L |
| Vent/Drain valve | 304, 316L |
| Eyebolt | 304 |
| Stabilizer blade | 304 |
| O-ring | EPDM, PTFE Viton, Silicone |
| Connection | |
| Connection of shell | Flange(Eyebolt) |
| N1, N2 In- outlet | Tri-clamp |
| N3 Pressure gauge(option) |
1.5″Tri-clamp
|
| N4vent valve(option) |
1/2" Tri-clamp (less than 12pcs) 1.5" Tri-clamp (more than 15pcs) |
| N5 Drain valve (option) |
1/2" Tri-clamp(3R) 3/4" Tri-clamp (5pcs to12pcs) 1' Tri-clamp(more than 15pcs) |
| Cartridges connection | 222 type, 226 type, DOE type |
| Surface Finish | |
| Finish type | Mechanical / electrolytic polishing, sand blasting |
| Polishing precision |
0.6um Inner surface Ra≤0.6um |
Dimension Parameters
| 3R(4R) | 5R(6R) | |||||
| 20" | 30" | 40" | 20″ | 30″ | 40″ | |
| A: Total height | 1123 | 1373 | 1623 | 1145 | 1395 | 1645 |
| B: The distance from inlet to center | 142 | 165 | ||||
| C: Shell diameter | Φ204 | Φ250 | ||||
| D1: The height from inlet to ground | 540 | 660 | ||||
| D2: The height from outlet to ground | 300 | 300 | ||||
| In-outlet N1, N2 Size | 1.5"/2" | 1.5″/2"/2.5" | ||||
| 7R | 8R | |||||
| 20" | 30" | 40" | 20" | 30" | 40" | |
| 1145 | 1395 | 1645 | 1170 | 1420 | 1670 | |
| 176.5 | 190 | |||||
| Φ273 | Φ300 | |||||
| 660 | 660 | |||||
| 300 | 300 | |||||
| 1.5″/2"/2.5" | 1.5″/2"/2.5"/3" | |||||
| 9R(10R) | 12R(11R) | |||||
| 20" | 30" | 40" | 20" | 30" | 40" | |
| 1170 | 1420 | 1670 | 1170 | 1420 | 1670 | |
| 202.5 | 215 | |||||
| Φ325 | Φ350 | |||||
| 660 | 660 | |||||
| 300 | 300 | |||||
| 1.5″/2"/2.5"/3" | 1.5″/2"/2.5"/3" | |||||
| 15R(18R) | 21R | 24R(27/30R) | 36R | 42R | 48R(54R) | |
| 40" | 40" | 40" | 40" | 40" | 40" | |
| 1947 | 1959 | 2026 | 2036 | 2044 | 2067 | |
| 240 | 265 | 290 | 315 | 340 | 365 | |
| Φ400 | Φ450 | Φ500 | Φ550 | Φ600 | Φ650 | |
| 682 | 694 | 714 | 729 | 734 | 744 | |
| 300 | 300 | |||||
| 3"/3.5"/4" | 3"/3.5"/4" | |||||
The above-mentioned data is the standard, it can customize according tocustomer's requirements. Unmarked length unit is mm
| Qty. of Cartridges | Model of Cartridges | Cartridges connection | Shell Material | In-outlet connection | O-ring | |
| 12R | 20 | S | 4 | K | E | |
| 3R=3Pcs | 21R=21Pcs | 20=20″Cartridge | S=226Type | 4-304 | K=Tri-clamp | E=EPDM |
| 5R=5Pcs | 24R=24Pcs | 30=30″Cartridge | T=222Type | 6=316L | E=Flange | P=PTFE |
| 7R=7Pcs | 36R=36Pcs | 40=40″Cartridge | D=DOEType | L=Screw thread | V=Viton | |
| 8R=8Pcs | 42R=42Pcs | S=Silicone | ||||
| 9R=9Pcs | 48R=48Pcs | |||||
| 12R=12Pcs | 56R=56Pcs | |||||
| 15R=15Pcs | ||||||
Q: CAN I HAVE SAMPLES TO TEST?
A: Yes, we are pleased to supply samples to test and check quality, miled sample order is available. Please note, free samples is not acceptable.
Q: DO YOU HAVE ANY MOQ LIMITED?
A: Our MOQ is 1PC to supply new customers.
Q: WHAT'S THE LEAD TIME?
A: Sample: 20-25days. Mass production: 25-30days depend on the order quantity.
Q: HOW DO YOU SHIP THE GOODS AND HOW LONG DOES IT TAKE?
A: We ususlly ship by sea. DHL, UPS, fedex TNT are also acceptable.
){kind=link}