| Customization: | Available |
|---|---|
| Material: | SS304/SS316L |
| Pressure: | Max Working Pressure(MPa): 5 MPa |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Material of TANK | SUS316L |
| Thickness of shell | 4-6mm |
| Working pressure | -1 to 4 Bar |
| Working Capacity Of the Vessel | 500 Liters |
| Working temperature | 121ºC |
| Design Temp | minimum 10ºC & maximum around 150ºC |
| Motor power | 1.5KW 380V 60Hz horizontal type |
| Agitator Speed | 70-90RPM |
| Agitator type | 2Layers |
| Diameter of TANK | 800mm-1000mm |
| Height from Floor to Motor Top Of the Agitator | 1500 mm |
Introduction
Liquid preparation vessel is for making base liquids before final reaction. Usually it has an agitator and a jacket outside for input conduction oil. The oil is heated by electric rods. There are oil inlet, outlet, overflow port, vent port, electric rods port, and temperature detection port on the jacket.
Features:
1. SS material, can bear high pressure during the process of materials reaction and feeding
2. Good heat-resistance, large range of working temperature (-196~600°C).
3. Good anti-corrosion, not easily get rust
4. Good heat transfer
5. Mirror polish, easy clean without residuals
Specs. Of 500 L. Preparation Vessel (Jhenten)
1-Material of heat preservation layer:SUS304 thickness: 3-5 mm
12-Polishing From Inner Side is Mirror 0.28μm
13-Polishing From Outer Side is Mirror not more than 0.5μm
14- TWO Rotating Balls ST.ST.316 L inside the Tank For Cleaning
15-At The Tank Bottom We Need Diaphragm Valve With Triclamp Connection
16- Connections ( 316L Triclamp Connections ) for CIP, SIP, Product Circulation+Pressure gauge + Air Filter,Connection + Safety Valve ( All 1.5 Inch)
17-Sight Glass With suitable Effective Light
18-Man Hole LID with Silicon OR EPDM O ring & Open towards the Agitator motor Side
19-Design & Manufacturing Qualification Document, include Official Certificates Of Tank Materials & Tank Welding Certificates
20-Factory Acceptance Tests ( FAT ) Documents
21-Site Acceptance Test ( SAT ) Documents
22-Installation Qualification Documents ( IQ ) & Operation Qualification Documents (OQ )
23-Grantee Certificate
Q: CAN I HAVE SAMPLES TO TEST?
A: Yes, we are pleased to supply samples to test and check quality, miled sample order is available. Please note, free samples is not acceptable.
Q: DO YOU HAVE ANY MOQ LIMITED?
A: Our MOQ is 1PC to supply new customers.
Q: WHAT'S THE LEAD TIME?
A: Sample: 20-25days. Mass production: 25-30days depend on the order quantity.
Q: HOW DO YOU SHIP THE GOODS AND HOW LONG DOES IT TAKE?
A: We ususlly ship by sea. DHL, UPS, fedex TNT are also acceptable.
){kind=link}